Store

Please search the store categories below for your well logging accessory/spare equipment or WellCAD borehole software needs. For upgrades from WellCAD 5.4 to 5.7, 5.5 to 5.7, or 5.6 to 5.7, if you are under Support & Maintenance, you should be able to Upgrade automatically by going to Help > About WellCAD within the software window. For WellCAD version V5.3 or earlier, a new license will need to be purchased as upgrades are no longer offered.

If you are not under Support & Maintenance, please contact us directly for a quote. We strive to always keep these items in stock for quick delivery, but there may be times when we cannot accommodate quick turnaround times. Contact us directly at sales@mountsopris.com if you have questions about stocked items or ordering in bulk.

Probe Stand Rack

04000-1510
$715.00
In stock
1
Product Details

Mount Sopris has developed a new probe rack that allows you to quickly connect geophysical logging tools in the field- Fast and Easy- every time!

A pair of our model 04000-1510 portable field probe racks is all you need!

These downhole logging tool racks are 48-inches (122mm) long, made of strong 2-inch (50mm) angle aluminum and fold-up nicely so that they fit into a probe or tripod case from Mount Sopris. They can easily be mounted in your logging truck, strapped to a skid logger, or shipped with your rental system. These handy and useful field racks will make your logging day go more seamlessly.

connection of wireline logging probes for mining

With a pair of racks adjacent to each other just place two of your Mount Sopris logging tools end-to-end then slide together, rotate, and listen for fast connection key-lock. Rotate the threaded brass ring clockwise by hand or with your 40-42mm spanner wrench until snug and you are good to go. Always make sure the O’rings are clean, without any pits, scraps, or issues. Lubricated the O’ring grease properly with a thin film of silicon O’ring grease provide with every Mount Sopris system. The brass rings should rotate freely. If not, just remove with a 1.5mm allen key, clean and re-lube.

Save this product for later

 

 

 

 

 

 

 

 

Print Friendly, PDF & Email