IWA – Intelligent Winch Assembly

Posted by on Jan 10, 2018 in Winches | Comments Off on IWA – Intelligent Winch Assembly

IWA – Intelligent Winch Assembly

IWA Intelligent winch assembly 2500 meters

The Mount Sopris Intelligent Winch Assembly (IWA) is smarter, stronger, safer, and more user-friendly, while holding more cable than any of its predecessors. With a powerful 6 HP servo motor and a 2,500-meter (8,200-feet) wireline capacity, this winch was designed to deliver more.

Featuring an intuitive touchscreen user interface, all winch settings and system diagnostics are easily monitored and controlled – giving the operator better visibility, precise control, and greater safety.

 IWA truck mounted winch horsehead

Operating Conditions

The IWA winch weighs 725 kg (1,600 lbs) when fully spooled and is designed to be mounted in a truck or trailer. The servo motors, gear boxes, and sheave bearings are sealed for life to prevent any debris from damaging the system. The ball screw shaft is also protected with bellows. And to prevent corrosion, the aluminum components are hard anodized and the steel parts are either galvanized or stainless. With minimal maintenance requirements, the IWA is built to handle even the harshest conditions and stand the test of time.

IWA winch touch-screen display

Features & Benefits

  • Intuitive touchscreen user interface
  • Log-in depth alarm and automatic stop
  • Rigging mode for single operator setup
  • Wireline acceleration safeguard
  • Depth alarms and automatic winch braking
  • Adjustable tension shut-off limits
  • System diagnostics
  • PC interface to permit remote support and control
  • Powerful 6 HP servo motor
  • Compact design for easy mounting
  • Minimal maintenance required
  • 2,500 meters (8,200 feet) wireline capacity
  • Spooled with 4.76mm (3/16”) 4-conductor wireline

Specifications – Metric/English

Motor6 HP, servo type
Speed0 – 55 m/min (0 – 183 ft/min)
Cable Capacity (3/16” cable)2,500 m (8,200 ft)
Weight (full drum of cable)716 kg (1,580 lbs)
Dimensions1.15 x 0.94 x 0.81 m (45.5 x 37 x 32 in.)
Power230VAC 50/60Hz, Single phase
Gear BoxRatio 78:1 max, Input to shaft 2600 RPM. Direct drive to cable drum.
Level-Wind driveServo driven. Electronically calibrated to drum width and cable diameter.
Operating TemperaturesIWA: -15 to 40 °C (5 to 104 °F)

Control Enclosure: 0 to 40 °C (32 to 104 °F)

Display Enclosure: 0 to 50 °C (32 to 122 °F)

Storage Temperature-25 to 70 °C (-13 to 158 °F)

IWA example setup within logging vehicle

Documents

Operation Manual 

Print Friendly, PDF & Email