Site icon Mount Sopris Instruments

Water Well Logging Equipment and Software

Borehole geophysical logging methods are used to measure physical properties of geologic material around the borehole, borehole fluid properties, and the integrity of well construction materials. Downhole tools manufactured by Mount Sopris directly measure or allow us to draw inference about these sub-surface properties and other aspects important in the ground water community. Listed below are common applications with links to Mount Sopris tools that address these aspects. Contact Us for additional details.

Aquifer Lithology and Thickness
40GRP-1000 combination Gamma, SP, SPR, 16-64-inch normal resistivity tool
40LGR-1000 combination Gamma-SP-SPR
QL40-ELOG, stackable combination Gamma, SP, SPR, 8-16-32-64-inch normal resistivity Plus SP & SPR
QL40-GR, Natural Gamma
32GR-1000, Slim Natural Gamma

Hydraulic Conductivity estimates and vertical flow (within borehole)
QL40-ELOG, stackable combination gamma, SP, SPR, 8-16-32-64-inch normal resistivity Plus SP & SPR. Resistivity ratios to estimate hydraulic conductivity.
QL40-SFM, 256 pulse/turn spinner flow meter
HFP-2293, Heat Pulse Flow meter
QL40-FTC-B, Fluid temperature and conductivity

Aquifer Properties including Porosity, Specific Yield, and Hydraulic Conductivity (in formation)
QL40-BMR, Borehole Magnetic Resonance

Distinct interval Water Quality
QL40-OCEAN, temperature, pressure, conductivity, pH, dissolved oxygen, & others
2FSA-1000, 1-liter Fluid Sampler

Borehole Diameter
QL40-CAL, 3-arm caliper

Deviation (borehole verticality)
QL40-DEV, 3-axis magnetometer / accelerometer deviation
QL40-ABI-2G, 2nd Gen. Acoustic televiewer with deviation sensor
QL40-OBI-2G, 2nd Gen. Optical Televiewer with deviation sensor

Well Completion and Integrity
QL40-FWS, Full Waveform Sonic (Cement Bond Logging)
2DDA-1000, bow-spring side-wall, 4-pi Omni-directional Density
0200M-1553, 4-pi Omni-directional Density

Many different downhole measurements are commonly obtained in the groundwater industry, some requiring specific borehole conditions. Natural gamma, for example, can yield information in any borehole condition, including metal or PVC cased holes, fluid-filled holes, and air. Other measurements, like the commonly used resistivity and SP, require a fluid-filled open borehole. The radius of investigation for most borehole geophysical measurements is typically only a few inches to a few feet around the borehole. Due to the small scale of the measurement, borehole methods tend to produce excellent vertical resolution. The combination of high resolution and greater accuracy make most borehole methods suitable for quantitative measurements and small-scale correlation of stratigraphic properties. For more information please navigate to our Library Page.

Exit mobile version